Com-Power LI-125A LISN 150kHz-30MHz

Available:

NEW

£1,595 excl VAT

The Com- Power LI-125A 150 kHz- 30 MHz Line Impedance Stabilization Network (LISN) is ideal for conducted emissions testing for EMC Pre-Compliance testing. In addition, all Com Power LISN’s are compliant to most worldwide standards such as FCC, CISPR, FAA and DOD.

The LI- 125A 30MHz LISN provides accurate and repeatable results by isolating the DUT from power source influences and providing defined stable impedance.

The Com-Power LI-125A LISN includes one pair of, separately housed, single-conductor networks, to be installed in series with each current-carrying conductor in a single- phase, dual-phase or DC power system.

A second LI-125A LISN pair can be used to accommodate 3-phase power systems (Wye or Delta configurations). The matching color-coded plugs for connection to the mains and DUT wiring are included.

The mounting plate of the Com Power LI-125A is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current. Please contact us for more information.

Key Features:

  • Fully Compliant with CISPR 16-1-2 and ANSIC63.4
  • Air- core inductors prevent saturation and permeability variation
  • Equipped with Supercon shrouded sockets at the mains power input and DUT power input ports.
  • Specification: CISPR 16-1-2 / ANSI C63.4
  • Application: Power Line conducted emission tests
  • Frequency Range: 150KHz - 30 MHz
  • RF Connector: 50 Ohms N-type (female)
  • Current Rating: 25 Ampere AC, 17 Ampere DC
  • Voltage Rating: 270 VAC (Line to Ground), 380 VDC
  • Inductors: 50 microhenry (air-core)
  • Mains & EUT Connections: Superior Electric SUPERCON shrouded sockets
  • Dimensions (each network): 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm